SITREX RH MODEL:
Specs vary depending on model of Sitrex.
Working Width: 42, 50, 58, or 66 inch
Approximate Weight: 370, 395, 441, or 613 lbs
RH2 is a rotary tiller of small dimensions, recommended for hobby farmers and small farms, suitable for orchards, vegetable crops and gardening. Particularlydesigned to have a sturdy built and a low power requirement to match light tractors of 10-25 HP. Standard Equipment: side chain drive in oil-bath. 4 curved blades each flange, flexible clutch.

RH4 is a rotary tiller suitable for use with tractors of 15-40 HP that require relatively light implements; it is particularly recommended for tilling soil for the more demanding crops and orchards. Standard Equipment: side chain drive in oil-bath, 4 curved blades each flange, flexible clutch.

RH6 is a rotary tiller suitable for use with tractors of 25-60 HP; it is particularly recommended for tilling soil for the more demainding crops and orchards. Standard Equipment: 3 point hitch, I and II cat., side chain drive in oil bath, 4 curved blades each flange, flexible clutch.
SICMA SA MODEL:
Specs vary depending on model of Sicma
Cutting Width: 41 or 49 inch
Approximate Weight: 260 or 287 lbs
TECHNICAL FEATURES
Lightweight shifting tiller suitable to work in orchards with low power, rigid and articulated tractors. Standard Equipment: 3 point hitch, side chain drive in oil-bath, PTO Shaft, 4 curved blades each flange, outwards turning end hoes. Particularly lightweight shifting tiller for 10 to 20 HP tractors with PTO 540 rpm.

SICMA ZLL MODEL:
Model #: ZLL140
Cutting Width: 55in
Approximate Weight: 366 lbs
TECHNICAL FEATURES
Lightweight for small rigid or hinged tractors, with skids for depth control and special previsions to avoid clogging in wet soil. Standard Equipment: Three point hitch, side chain drive in oil bath, PTO shaft, four curved blades per flange, outwards turning end hoes, moveable couplings. Particularly lightweight fixed tiller for 20 to 35 hp tractors with 540 RPM PTO.

SICMA SF MODEL:
Specs vary depending on model of Sicma.
Cutting Width: 65 or 73 inch
Approximate Weight: 648 or 772 lbs
Technical Features
Tiller with screw adjustable side shift, with lateral gear drive in oil bath. Standard Equipment: 3 point hitch, side gear drive, PTO Shaft, 4 curved blades per flange, outwards turning end hoes, side skids for depth control, box frame. Medium-weight tiller with screw adjustable side shift for 20 to 50 hp tractors with PTO 540 r/min.

SICMA ST MODEL:
Model #: ST205
Cutting Width: 81in
Approximate Weight: 882 lbs
Technical Features
The load-bearing frame in box shaped plate and the oversized drive devices make this unit extremely sturdy. Side drive by gears in oil bath and long life bearing seals of rotor support.

Standard Equipment: 4 curved blades per flange, 3 point hitch adjustable in length and width, driveline with clutch L750.  Medium-weight fixed tiller for tractors from 35 to 60 HP, with slides.
SUB SOILER:

  • 3/4” x 6” beam
  • Tapered cutting edge reduces soil resistance, less wear and more economy of operation
  • High quality, low price
  • All hardware cadmium plated
  • Quickly attached
  • Uses 3 point linkage
  • Narrow beam gives only slight ridging
  • Simplicity of construction
  • Approximate weight-110lbs
API ALL PURPOSE PLOW:
Specs vary depending on model of API Plow.
Number of Shanks: 5, 7, 9, or 11
Approximate Working Depth: 7, 8, 8, or 9 inch
Approximate Working Width: 49, 69, 89, or 98 inch
Approximate Weight: 320, 430, 560, or 680 lbs
BIG-BEE STRAIGHT SHANK MIDDLE BUSTER:
This Economical design offers you a middle buster with the same type furrow buster as offered on our original design. The simple designed frame allows us to offer a lower priced implement.
The Straight Shank Middle Buster comes completely assembled with Cat. I. implement pins.
  • Approximate shipping weight: 90 lbs.
  • 14 inch solid buster point
  • Category 1 three point hitch
  • Welded assembly
  • Removable Hitch Pins and Buster Point

Specifications subject to change without notice

BIG-BEE 2-ROW MIDDLE BUSTER:

  • Replaceable 14 inch point
  • Row spacing 36 inch, 38 inch, 40 inch, 42 inch
  • Assemble at Factory
BIG-BEE SHEAR BOLT PLOWS:

  • Ideal for the average small farm user
  • Parts replaceable with genuine ford
  • Has shear-trip beam
  • Constructed for for durability
  • Finished with quality weather resistant paint
  • Both one and two blades are available in 14 inch
​tillage

(985) 878-3240

10113 Hwy 40 West  IndependenceLA  70443

POWERLINE TILLERS:
Specs vary depending on model of Powerline Tiller.
Working Width: 48, 60, or 72 inch
Number of Blades: 24, 32, or 36
Tillage Depth: 3-4 inch
HP Requirement: 25-30, 35-40, or 50-55

Net Weight: 385, 463, or 640 lbs
AGTILL TILLERS:
Working Width: 47, 63, 71, and 83 inches (depending on model)
Working Depth: 6in
HP Demand: 20, 24, 31, and 34 (depending on model)
Number of Blades on Drum: 18L-18R, 24L-24R, 27L-27R, and 30L-30R (depending on model) (six blades on rotor)
Length: 55in
Overall Width: 50, 66, 85, and 85 (depending on model)
Height: 37in
Weight: 650, 694, 760, 771 lbs (depending on model)
PTO shaft with slip clutch included.