(985) 878-3240

10113 Hwy 40 West  IndependenceLA  70443

Specs vary depending on model.
Working Width: 103 or 138 in
Working Width (Spreading and Turning): 114 or 154 in

Weight: 396 or 440 lbs
Specs vary depending on model.
Working Width: 20 or 23 ft
Weight: 1265 or 1465 lbs

Tire Size: 195-65/15 or 195-70/15
Specs vary depending on model.
Three point hitch category: 1 or 2
Number of Disc: 5, 6, or 7
Conveyor Disc: 1 or 2
Cutting Width: 6ft 8in, 7ft 10in, or 9ft 1in
Weight: 1100, 1210, or 1276 lbs
Horsepower needed: 50 thru 100
PTO Shaft: 540RPM
Main PTO shaft with free wheel
4 belts with pendular tensioner
Hydraulic lift for transport positioning equipped with automatic safety hook, operated
from tractor.
Plastic-coated canvas cover folding during transport.
Automatic quick release device
Stabilizing double springs
Adjustable mowing height

Reinforced oval discs with cleaner device incorporated and conveyor cap

Model: TP20 2000lbs Bale Fork
A formed frame made of heavy wall 2" x 3" rectangular tubing welded to 6" channel iron. This unit is designed to put the weight of the bale close to the tractor. A removable 16" spear prevents bale from rolling off forks on uneven terrain.
Model: FLS1
Designed to handle round bales up to 2000 lbs. with a removable 
forged spike 47" long and two 1 1/4 stabilizer spikes.  This will fit most double cylinder front loaders with a load center arm distance of 50".
Model: Skid Steer Bale Spear
Spike - 42” Usable Length / 48” Overall Length
Skid Steer Front End Loader Quick Attach Compatible

2000 LB Capacity
The most complete universal Haymaker for crops. Excellent job in spreading, tedding or windrowing. High rate performance, very simple operation and study construction: all these qualities can be round in our Haymaker 300. Our Haymaker 300 is fitted with wide tires in order to improve ground adherence and obtain a better performance on rough terrains. Tines are positioned by centrifugal force and float at forage cut level to collect the whole crop. Spreading and tedding: evenly moving and spreading of hay. Raking: at high working speeds you will get a soft and loose swath and a precise windrow separation. Adjustable deflectors: to prevent losses on terrain boundaries. Center dividing head provides even spreading which is necessary to avoid noxius masses of hay which might cause fermentation. Deflectors are adjustable to allow spread turning of hay when they are wide open. They can be closed following working needs to obtain even and aerated windrow.
Working Width: 119 in
Transport Width: 91 in
Height: 31 in
2 Pneumatic Tires 15 x 6.00 - 6 ply
Rotors: 180 rpm
20 Double Teeth
Horsepower Requirements: 20 HP
Hitch Type: 3-point hitch
Weight: 726 lbs.
Specs vary depending on model.
The SITREX Tedders are ideal machines to spread, air and turn all types of forage in any type of terrain. Due to the number of models available and its versatility, the SITREX Tedder has been used for over 30 years in small and large farms and has been found efficient and reliable. The Tedder allows a perfect and even spreading of forage. Tines pick up a small quantity of forage on every turn of the rotor and lay forage on the ground perfectly aired without damage or dirt. The 4 rotor Tedder is also available in hydraulic version, with hydraulic lift system on the two outer rotors. The hydraulic Tedder version allows the operator to put the machine in working or transport position through the tractor hydraulic system.
Number of Rotors: 2 or 4
Tine Arms Per Rotor: 6
Working Width: 10 or 17 ft
Transport Width: 8ft 9in or 10ft 3 in
Weight: 385, 950, or 1000 lbs
Tire Size: 16x6.5-8
PTO Tractor Requirements: 15 or 25 HP
PTO Slip Clutch: standard
Operating Speed: 10mph